Â鶹ÊÓƵ

Hydraulic Cone Crusher

Hydraulic Cone Crusher Multiple models for selection, can be customized according to customer requirements
An ideal equipment for hard stone quarry and mining industry

HP Series of highly efficient Hydraulic Cone Crusher is a world-level cone crusher introduced with the up-to-the-minute technology of Germany. This series cone crusher not only improves the production capacity and crushing efficiency, but also widens applying area, hardness range of materials from limestone to basalt. It has a great crushing performance in the work of medium-size crushing, fine crushing and super fine crushing.

  • Full hydraulic design
  • Excellent final product shape
  • Small volume but high efficiency
  • Introduction
  • Technical Parameters
  • Gallery
Content Index

Brief introduction of hydraulic cone crusher

For the hydraulic cone crusher, it is different from the spring cone crusher for sale. Its protection device is the hydraulic system. That is why it is called as hydraulic cone crusher.

The crusher is the improved type of spring cone crusher and can be used to replace ordinary hydraulic cone crusher in the field of mining and construction.

The technology of HPT series multi-cylinder hydraulic cone crusher can obtain larger output capacity in smaller space with less or smaller volume of equipment. The HPT multi-cylinder hydraulic cone crusher adopts the full chamber feeding to realize the unique "inter-particle lamination crushing". When the material passes through the crushing chamber, the principle of multiple crushing action makes the particle size more uniform. For aggregates production, the cubic shape of the product meets the sand and gravel industry standards, thereby bringing greater investment benefits to users.

Brief introduction of hydraulic cone crusher

Working Principle of hydraulic cone crusher

As it is shown, the motor drives eccentric bushing revolve via V-belt, driving shaft and bevel gear. The mantle is revolved under the action of eccentric bushing. Sometimes the concave is near to mantle, and sometimes the concave is far from mantle. The raw material is being pressed and impacted all the time in the crushing chamber. Then the crushed the material is discharged from the discharge opening.

Working Principle of hydraulic cone crusher

Advantages of hydraulic cone crusher

1. High efficiency: The cone crusher machine adopts the optimized structure of fixed main shaft and small spherical shaft, which is 5% ~ 15% higher than the efficiency of the old spring cone crusher for sale;

2. Large production capacity: The hp cone crusher is designed with a perfect combination of crushing stroke, crushing speed and crushing chamber shape, so that the output of this machine is 35% ~ 60% higher than that of the old spring cone crusher under the same crushing cone size.

Large production capacity:

3. High-quality aggregate: The crusher cone adopts the unique lamination crushing principle to produce the crushing effect between different aggregates, so that the proportion of cubes in the finished product is significantly increased, the needle-shaped stones are reduced, and the particle size is more uniform.

4. More stable operation: When there are hard objects such as iron blocks that can not be broken into the cone crusher liner, the over-iron protection device will automatically release it and then reset it immediately.

5. Multi-point split hydraulic lubrication control system can ensure double protection of bearing lubrication and overload protection of the machine.

Advantages of hydraulic cone crusher

7 factors need to be noted when hydraulic cone crusher is working.

In order to make sure the rock crusher cone works at higher efficiency, and protect the cone crusher machine so that its service life is longer. Here are 7 factors need to be noted.

1. The feeding size is not allowed to exceed the maximum feeding size allowable;if the feeding size is too big, the material will skid in the crushing chamber but can not be crushed, the capacity will be lower. Meanwhile, if the feeding particle size is too large, it will have a greater impact on the cone crusher, affecting the normal use of the cone rock crusher, and even causing the cone crusher machine downtime;

2. The discharge opening is not allowed to be smaller than the minimum discharge pening size of the corresponding cone crusher cavity type.If the discharge opening is too small, it will cause high load current and cause damage to the hydraulic cone crusher, such as burning of copper sleeves, premature damage of cone crusher parts.

The discharge opening is not allowed to be smaller than the minimum discharge pening size of the corresponding cone crusher cavity type

3. Uniform feeding in full crushing cavity is required.Uneven feeding or inability to feed in full cavity will cause large fluctuations in the load current of the cone crusher, decrease in output capacity, uneven wear of the cone crusher wear parts, and shorten the life of the cone crusher bowl and mantle;

4. The operating load is generally 75%~90%.According to the material crushing situation, the cone crusher load is controlled at 75%~90%, preferably not more than 90%. If the load is too low, the lamination crushing can not be achieved, and the cone crusher can not exert its superior performance; if the load is too high, a large load will be generated on the copper sleeve of the cone crusher, which will shorten the life of parts such as the copper sleeve.

The operating load is generally 75%~90%

5. Strictly control the moisture content when the feed contains viscous materials,it is easy to cause the crushed materials to be difficult to discharge into the crushing cavity, and the load current of the cone rock crusher increases, resulting in shutdown. Therefore, when crushing viscous materials, the moisture content must be controlled, generally not exceeding 5%.

6. Avoid the jumping of the support sleeve;the jumping of the support sleeve will damage the copper seat lining and also damage the main frame. The main reasons for the jumping of the support sleeve are: ¢ÙThe pressure of the safety cylinder is too low; ¢ÚThe feeding is uneven, with more material on one side and less material on the other side, and the load is uneven; ¢ÛThe feeding is too large, the load is increased, and the normal crushing of the material is affected. ;¢ÜThe discharge opening is too small and the load increases.

Avoid the jumping of the support sleeve

7. Control the lubricating oil temperature;The viscosity of the lubricating oil is a main indicator to ensure the lubricating effect of the multi-cylinder hydraulic cone crusher due to its large eccentricity, high power and large calorific value. The cooler in the lubrication system can reduce the lubricating oil to a suitable temperature, so that the lubricating oil has a good lubricating and cooling effect.

Control the lubricating oil temperature

Hydraulic Cone Crusher Goods Delivery

Based on good quality and decades of experience, the Hydraulic Cone Crusher which is manufactured by HAMAC was exported to different countries. The Hydraulic Cone Crusher will be packed and loaded in our factory, and then be shipped to our clients safe and sound.

Hydraulic Cone Crusher shipping pictures

Hydraulic Cone Crusher Technical Parameters

Model Crushing Chamber Standard type Short heard type Power
(kw)
Capacity
(t/h)
Feeding opening
£¨³¾³¾£©
Min. Discharge opening
(mm)
Feeding opening
£¨³¾³¾£©
Min. Discharge opening
(mm)
HPT200 Extra Coarse(EC)         132-200 90-250
Coarse(C) 185 19 76 10
Medium(M) 125 17 54 6
Fine(F) 95 13 23 6
Extra fine(EF)     10 5
HPT300 Extra Coarse(EC) 230 25     180-250 115-440
Coarse(C) 210 20   10
Medium(M) 150 15 50  
Fine(F) 105 10 20 6
Extra fine(EF)     20 6
HPT400 Extra Coarse(EC) 295 30     280-355 140-630
Coarse(C) 250 25 90 10
Medium(M) 195 20   8
Fine(F) 110 14 40 6
Extra fine(EF)     30 6
HPT500 Extra Coarse(EC) 330 30     355-450 175-790
Coarse(C) 285 25 90 13
Medium(M) 200 20 55 10
Fine(F) 133 16 40 8
Extra fine(EF)     35 6
   
Model   10mm 13mm 16mm 19mm 22mm 25mm 32mm 38mm 45mm 51mm
HPT200 t/h 90-120 120-150 140-180 150-190 |160-200 170-220 190-235 210-250    
HPT300 t/h 115-140 150-185 180-220 200-240 220-260 230-280 250-320 300-380 350-440  
HPT400 t/h 140-175 185-230 225-280 255-320 |275-345 295-370 325-430 360-490 410-560 465-630
HPT500 t/h 175-220 230-290 280-350 320-400 |345-430 365-455 405-535 445-605 510-700 580-790

Note: Our products are being updated constantly, all rights reserved by HAMAC.

Hydraulic Cone Crusher Application Case

The Hydraulic Cone Crusher is widely used for different projects all over the world. HAMAC exported the Hydraulic Cone Crusher to different countries and got good comments from our clients.

Products HAMAC High Quality and full range of equipments High Quality and full range of equipments
About Us HAMAC Several production bases for production Several production bases for production